1. Good dilution, UV light low energy can be cured. 

2. Excellent anti-fog performance and high transparency. 

3. Good adhesion, low warpage. 

 

■ Specifications 

1.Chemical Composition: Acrylic resin 

2.Physical Status: Fluid @ 25 ℃ 

3.Appearance: Clear yellow 

4.Solid content: 50 ± 3% 

5.Viscosity (26 ℃): 30 ↓ cps 

6.Resin gravity: 1.06 ± 0.05 g / cm3

 

■ Curing conditions 

1. Ruoyu diluted, it is recommended to IPA diluted to an appropriate proportion. 

2. The temperature of the oven (four): 80,85,90,90 ℃; UV accumulated energy: 300 ~ 360mj / cm2. 

3 recommendation by the membrane surface primer applied to deal with it. 

 

 

■ finished properties (Sunbeam C87H 100μmPET) 

1.Coating thickness: 8 ~ 10μm (dry film thickness) 

2.Penetration (400 ~ 700nm): 90 ↑% 

3.Pencil Hardness (weight 500g): HB ~ F 

4.100 grid knives (after molding): 5B 

5.60 ℃ steam 3 to 5 seconds fogging 100 P: ass 

6.90 ℃ steam fogging 3 to 5 seconds 20 times: Pass 

7.Water soak 10 hours, naturally dried 12 hours after anti-fog: Pass 

8.Water soak 10 hours, 12 child naturally dry-fog: Pass